With October’s Wardrobe Challenge including zippers, I thought now would be a good time to share a few easy ways to embellish with exposed zippers.
A fun way to change the look of a pair of jeans is to embellish the leg with an exposed zipper. Follow along:
- Strip of fusible interfacing cut 3″ wide and at least 2″ longer the zipper,
- 2 metal zippers (any length)
- #14 denim Jean needle
- Thread of choice
- Fabric pen
- Quilter’s Ruler
- Tailor’s Clapper
Step 1: On the wrong side of the fabric, mark the center of the pant leg (could be front or back, wherever you want the zipper).
If marking an existing pair of jeans, rip out the hem at least 5″ from each side of new mark. Press the fusible interfacing along the newly marked center line.
Step 2: Mark the hem, hem allowance, and the length of the zipper opening down center of the pant leg.
Step 3: Determine the width of the zipper opening (depends on the width of the zipper teeth). Draw in opening, top edge, and then add a triangle from the center cut line to each corner (as shown above).
Step 4: Cut along center marking. Cut each triangle point (if you are worried about the fabric fraying, add Fray Check to the top corners)
Step 5: Press the seam allowances back and press triangle tip up.
Step 6: Line up the zipper with the metal teeth in the center of the opening. Check the placement of the zipper stop and zipper tab.
Step 7: Fold back the zipper tape and press in place at the hemline.
Step 8: Pin zipper in place.
Step 9: In this example, I am using standard polyester thread, cotton or silk thread would work too. Set the sewing machine to a triple stitch and lengthen the stitch length to 4.0. (Note: if you don’t have this feature, use denim thread, straight stitch, stitch length 4.0)
Step 10: Stitch along the edge of the zipper. Open and close the zipper as needed in order to get the foot by the zipper tab. Step 11: Notice how I have lined up the edge of the zipper foot with the metal teeth, a very easy to get a straight stitch … or this would be a great time to utilize the laser vision guide feature on your machine! :)
Step 13: Hem the jeans and move onto the other leg.
That’s it! Now this is just one quick, easy way to install a hidden zipper. I will give you some more ideas next time.