A little creative serging! I mentioned I am finishing up a serging book. The book has challenged me to play with new threads, new stitches, new serging feet, and more. I wanted to share a quick serging stitch that you might find useful for restyling or adding embellishment to one of your outfits.
This is a 3-thread flatlock stitch with a decorative crochet thread in the upper looper. The left needle and lower looper have a similar color polyester thread. The photo above shows the front of the flatlock stitch and the backside. The backside looks like a ladder stitch. (the peach thread is just the serged edge of the seam).
I started with a basic gored skirt. The front has 2 seams and after I finished flatlocking those two seams I decided to add embellishment to the center front. So the center front really does not have a seam. This would be a great way to create unique fabric!
Here is the back view. Again there are 2 seams on each side back and this time there is a real seam down the center back with a hidden zip. In order for this stitching to look even, because of the zipper, I stitched the flat-felled embellishment down the edge of each center back seam, then added the zipper and closed the seam. That part got a little tricky and you can see the stitches are not perfectly even. I haven’t decided if I am going to rip it out and start again or hope nobody is looking at my tush that closely to notice 🙂
- Set your serger up for a 3-thread overlock – I will be using the Brother Project Runway 5434PRW and the standard setting for the needle and looper tensions are 4. When I give you new tension numbers you can compare this with your machine. If you are serging on the Babylock air-threading serger set up your serger for the 2-thread flatlock – wide.
- Thread the upper looper (or the only looper for the 2-thread flatlock) with a decorative thread. Use standard poly serging thread in the needle and lower looper.
Decorative Thread Ideas:
- Crochet Thread (I got this at WAWAK Sewing)
- Coats denim jean thread (which comes in a lot of colors now)
- Thin ribbon
Get the idea – be creative!
Next, there are a few changes to the serger settings:
Stitch Width: 5mm
Stitch Length: 2-4mm
Needle Tension: Decrease to 0 -3 (remember my standard setting is 4 so adjust for your serger)
Upper Looper Tension: Decrease to 2 – 3
Lower Looper Tension: Increase to 6 – 9
Disengage the knife
These setting serve as a guide. It will depend on the fabric and thread you end up serging with.
See if you have a Blind Hem Foot, if not you can use a standard foot.
There is a setting on the foot that moves to the right and left, allowing the needle to pierce more or less of the fabric. Test the stitch on your fabric to determine the setting.
Fold the fabric in half or if you are embellishing a seam, fold along the seam line. Align the fabric along the shield on the blind hem foot (if using a standard foot, mark a spot to align with).
The idea is for the needle to pierce the fabric – half the stitch is on the fabric and half is off the fabric. In fact the stitches look really messy coming out of the serger!
Stretch out the folded fabric to lie flat and press.
Pretty simple, but so fun! Have you ever tried this before? I would love some more ideas for decorative threads or yarns to use with this stitch.
Today is officially the end of National Serging month, did any of you pick up a good deal on a serger?
If you are thinking of adding a basic serger to the sewing room, really inexpensively, take a look at this Brother 1034D – on sale for $217 and free shipping! I had to double-check that, kind of thought it was a misprint 🙂 I have no idea how long the sale is on for or how many are in stock, but that is a great deal.